• 100-350KG
  Weight（Specific to actual production）
• 0.12-5t/h
  Production capacity
• 1.5-15kw
  Equipped with power
• 1930×1220×1810mm
  Dimensions（Specific to actual production）

More

DJ type beater is suitable for the separation of pulp and slag after crushing and pre-cooking pome fruits and various berry fruits .

1. Scope and characteristics of application
DJ type beater is suitable for beating tomatoes, kiwi, strawberries, apples, pears and pre-cooked and softened fruits such as hawthorn and dates Separate. The MDJ-type pitting and beating machine not only meets the scope of application of the DJ-type beater, but also is suitable for pitting and beating separation of various stone fruit fruits. And has the following characteristics:
1. Automatic separation of slurry and residue.
2. It can be combined on the production line or produced on a stand-alone machine.
3. The parts in contact with the materials are made of high-quality stainless steel, which conforms to food hygiene.

2, the main structure diagram

1, Transmission cover　2, Sleeve shaft  3. Shaft seat 　　　 4. Rear tube cover  5. Blocking plate 　　 6. Cylinder body 7. Spline shaft 　　 8. Screen  9. Adjusting seat 　　 10. Scraper  11. The front cover of the tube 　　 12. The frame	1, Transmission cover   2, Shaft sleeve 3. Shaft seat   　　 4. Rear tube cover 5. Feeding slurry blade shaft 6. Cylinder body 7. Spline shaft 　　 8. Screen  9. Beating rod 　　 10. Slurry outlet blade shaft 11. Front cover of tube  　12. Frame

Description:
1. Double-channel beater: The structure of each channel is the same as the single-channel pulping machine.
2. Core-removing dual-channel beater: The structure of the first channel is the same as that of the single-channel pulping machine, without adding a single-channel pulping machine rotor structure. The two-channel structure is the same as the single-channel pulping machine.
3. Three-channel beater: The structure of each channel is the same as that of the single-channel pulping machine.
4. Specific structure: refer to single-channel pulping machine and de-core single-channel pulping machine

3, Working principle
1. DJ-type beater: The motor is driven by a belt to make the scraper mounted on the spline shaft rotate at high speed. When the broken fruit passes When the feed inlet enters the machine, the receiving plate will evenly discharge the material to the scraper and screen. Due to the rotation effect of the scraper and the existence of the lead angle, the material moves along the cylinder to the outlet end, and the moving track is spiral. The material is affected by the centrifugal force during the movement between the scraper and the screen cylinder. Grated, the juice and meat (have become pulpy) pass through the sieve holes and are sent to the next process. (Double and three beating machines are linked to repeat the above process). The skin and seeds are discharged from the slag hopper. To achieve the purpose of automatic separation. As long as the screens of different specifications are changed and the lead angle of the scraper is adjusted, different beating speeds can be changed to obtain satisfactory results.
2. MDJ type beater: the motor is driven by a belt to make the rotor part mounted on the spline shaft rotate at a high speed, and the fruit enters from the inlet Inside the machine, the feeding blades convey the material to the beating rod in a spiral, and the material is smashed under the action of the beating rod. Due to the presence of centrifugal force, the juice and meat in the material (have become pulpy) pass through the sieve holes on the screen to enter the next stage of beating (the sieve holes are determined by the size of the fruit core), and the core is discharged from the slag pulp leaf The slag outlet, so as to realize the automatic separation of slurry and slag.
The machine has two types of single-channel and dual-channel models. When it is used for beating stone fruit (such as mango), if you choose single-channel In the nuclear beater, the skin and meat flow from the discharge hopper into the buffer tank, and the core is discharged from the slag discharge. The core-removing double-pass beating machine, the first pass is core-removing, and the second-pass beating realizes automatic separation of the core, peel and slag. It is recommended that users prefer to use the core-removing double-pass beater. The beating principle refers to the DJ type beating machine.
6. Operation and precautions
1. The machine must be installed horizontally and fixed with anchor screws.
2. Tighten the bolts on the whole machine and check whether all the screws in the shaft are loose. Clean the inside and outside of the whole machine to keep it clean.
3. Turn on the power supply of the drive motor and confirm that the direction of rotation of the machine is consistent with the direction indicator.
4. Test run for 5 minutes. After confirming that the machine is normal, you can feed normally.
5. Then add the materials evenly without impact. Depending on the specific situation of the slag and slurry, the helix angle of the scraper and the gap between the scraper and the screen should be properly adjusted after the shutdown to make the juice content of the slag meet the technological requirements. Scraper helix angle adjustment method: adjust the inclination of the scraper by adjusting the bolts on the front and rear axle brackets; adjust the gap between the scraper and the screen: adjust the distance between the beating board and the screen by adjusting the nut on the axle bracket.
6. When the machine stops, just cut off the power of the motor directly. When the rotor does not stop rotating, do not open the front cover of the drum. Turn the hand wheel counterclockwise to open the front cover of the cylinder.
7. The filter must be washed with water and a brush after each shift. When cleaning, open the front cover of the cylinder and unscrew the tightening screw at one end of the spline, then the rotor parts can be easily drawn out, and the screen can be taken out directly.
8. Regularly check whether the motor is overloaded and heats up, and whether the bearing part is oiled.

• 

  Spiral juicing machine/Screw Juice Extractor Fruit juice production line Grape Juicing machine

• 

  Industrial fruit Juicing machine Fruit pulping machine Industrial fruit crushing machine

• 

  stainless steel large orange grinding and juicing processing machine orange juicing machine

• 

  Juicing machine industry big model industrial juicing machine Juicing machine for industrial use

• 

  Big size Fruit seeding Removing and Juicing or pulping machine