Spiral refining machine_Hanlong Machinery

Weight（Specific to actual production）
5t/h
Production capacity
5.5kw
Equipped with power
1450×560×1350mm
Dimensions（Specific to actual production）

Spiral refining machine
Spiral refining machine
Spiral refining machine
Spiral refining machine
Spiral refining machine
Spiral refining machine

king@hlmachines.com

Product video

Product parameter

		Name	Technical indicators
		Production capacity	5t/h
		Equipped with power	5.5kw
		Rotating speed	487r/min
		Compressed air consumption	1m³/h
		Compressed air pressure	0.4MPa
		Dimensions	1450 ×560x1350mm

Product details

The machine introduces foreign advanced technology, which is suitable for automatic separation of pits, residues and juices in various juices and pulps to meet the requirements of refining.

1. Overview
1. Spiral refining machine is currently the world’s most advanced refining equipment. It separates orange, citrus, lemon, grapefruit juice pulp from the core and fiber, Meet the refining requirements.

2, Structural features and working principle

1. Solenoid valve 2. Oil-water separator 3. Frame 4. Juice tank 5. Slag outlet 6, Skeleton 7, Lining net 8, Filter screen 9, Screw shaft 10, Top plate 11, Cylinder 12, Breathable cover 13, Feed box 14 , Feed port 15, Drive motor
The spiral refining machine consists of a frame, a slag hopper, a juice tank, a skeleton, a lining, a filter, a screw shaft, a top plate, a cylinder, It is composed of feed port, feed box, breathable cover, transmission motor and other parts. Working principle: The juice residue mixture enters the feed box from the feed inlet and flows into the spiral working chamber. Under the action of the screw shaft, the juice residue mixture is transported to the residue outlet, and the juice and pulp enter the juice accumulation tank through the filter; And the pit is pushed to the slag outlet. When the thrust of the slag conveyed by the screw shaft is greater than the force of the cylinder acting on the top plate, the slag outlet is pushed open and discharged from the machine.
3, Installation, debugging, operation, maintenance
1. The machine must be placed on a level concrete floor. If it is uneven, it must be leveled. Turn on the power of the refiner motor, confirm that the machine is running without abnormal noise, and then turn on the air source (note: the pressure can not exceed 0.4MPa), and power on the solenoid valve, let the top plate close the slag outlet, and further confirm whether the machine is operating normally . Open the breathable cover again and pay attention to whether the spiral rotation direction is consistent with the direction indicator;
2, Feed the material evenly into the machine;
3. When the machine is running, there is a sound of slipping of the transmission belt, immediately after stopping the machine, grab the handle and lift the pulley guard up. Lower the pulley guard, loosen the adjustment screw behind the motor pulley, let the motor seat pull the belt tightly under the action of gravity, and then tighten the adjustment screw.
4. When stopping, disconnect the solenoid valve first, let the top plate return, and then cut off the power supply of the drive motor.
5. After the machine is shut down during each shift, be sure to open the skeleton and clean the inside and outside of the machine.
6. Grease the bearing parts regularly.

Years of focus fruit and vegetable processingProvide solution design, equipment selection, one-stop service

Spiral refining machine

Customized Product Type:Spiral refining machine