The equipment uses rollers to transport fruits and vegetables. This machine is suitable for the transportation and selection of spherical or oblong fruits and vegetables.

1. Product use and characteristics

    This machine is widely used in the fruit inspection process in the conveying process of fruit and vegetable raw materials with a similar shape. The frame of the machine is welded and formed by stainless steel profiles, and the roller parts are composed of special short-axis stainless steel chains and stainless steel polished seamless steel pipes or PPplastic tubes. It has a reasonable design, It has the characteristics of high fruit selection efficiency and convenient use.

2. The working principle of structural features

This machine is mainly composed of frame, conveyor chain, roller, driving sprocket, driven sprocket, transmission reducer and other important components.

Working principle: The conveyor chain moves forward under the drive of the drive sprocket, and at the same time the rollers between the conveyor chains rotate. After the material enters the machine, it turns over and moves forward under the drive of the rollers. During the moving process, unqualified fruits and vegetables are detected to ensure the quality of the fruits and vegetables. This machine can also be designed to convey bad fruit belt conveyors and other schemes according to user requirements.

3. Installation, adjustment and operation

1, The installation must be firm and the rack should be kept level.

2, Before starting the machine, check whether the screws at each part are tight.

3. Before using the machine, grease should be added once to each bearing and stepless transmission, and then once every six months.

4. Stones, screws, and tools are strictly prohibited from falling into the equipment to prevent them from falling into the next process.

5, Turn on the power supply of the transmission reducer, confirm that the rotation direction of the reducer is consistent with the direction indicator, and run for two minutes. After confirming that everything is normal, the material can be fed and discharged for continuous production.

6. When picking fruits manually, if the labor is not in time, you can increase the labor or slow down the conveying speed (operation method: use the handwheel on the reducer to slow down the speed of the reducer)< /span>

7. When feeding, add the materials evenly and do not impact.

8, Always check whether the motor is overloaded and heat up, and if any defects are found, you must contact the maintenance personnel for repairs.

9, After stopping, be sure to clean the inside and outside of the whole machine to keep it clean.