Surf type cleaner

Under the combined work of bubbles, surfing, lifting, and spraying, the equipment has the characteristics of high cleaning, energy saving and water saving. The flushing water is filtered and reused, with self-lifting, which is convenient for connection.

1.Overview
The surf type cleaner is a special machine that uses the pressure of the water pump to make the water produce a strong stirring motion, so that the material rolls in the water, so as to achieve the effect of cleaning fruits and vegetables. This machine is widely used for cleaning fruits and vegetables and has a significant water saving effect.  
2.Structural features and working principle

1. Drain valve   2, Flushing header   3, Water bubble header   4, Circulating water pump  5, Water filter box   6 , Water tank   7, Lifting frame   8, Speed reducer   9, Flushing nozzle   10, Water bubble branch pipe   11 , Anti-sinking net   12, Lifting mesh belt

The machine is composed of water tank, hoist, circulating flushing pump, transmission part and other parts. Due to the pressure in the water during work, the fruits and vegetables are violently tumbling and agitated in the water. After the cleaning water is filtered, the circulating flushing pump is pressurized to the feed inlet The nozzle is flushed back, the direction of the nozzle is adjustable, the material is flushed again by the high-pressure water sprayed from the nozzle, and drifts toward the outlet direction, the outlet is handled by the scraper hoist, the speed of the scraper hoist is adjustable (adjust the scraper lift The machine speed reaches the required production capacity), and the washed fruits and vegetables are sent to the next process (a spray pipe can be added to the outlet scraper elevator according to user requirements for further spray washing). It can also be changed to different lifting structures according to different materials of users.

3.Installation, commissioning, operation and maintenance
1.The machine must be placed on a level concrete floor and pad up to the level. Close the drain valve and feed water into the water tank. When the water reaches a certain position, stop the water intake and start the circulating flushing water pump (for operation, please refer to the pump operation manual), turn on the hoist drive power supply and start the hoist. After everything is running normally, that is Add materials to the water tank for cleaning. The machine can continuously produce materials in and out normally.
2.The filter of the circulating flushing water pump is cleaned every two hours. If there are many leaves or debris in the sink, it must be cleaned in time. There is no need to stop the machine during cleaning, just remove it. When there is a lot of soil in the water tank, you need to stop the machine and clean the spray hole after draining the water (generally it is not easy to be blocked).
3.Cut off the power when shutting down, open the drain door to drain water, and rinse the inside and outside of the whole machine to keep it clean.
4.The lubricating oil of the stepless governor must be changed regularly, and the dirty oil must be drained when changing.
5.Regularly refuel the bearing parts.