The equipment uses stainless steel mesh belt, engineering plastic mesh belt, polypropylene woven mesh, etc. as the conveying carrier for conveying. This machine is suitable for the selection of various fruits and vegetables.

I，Overview

The machine uses a conveyor belt as a carrier, suitable for various fruits and vegetables in the food industry Of delivery. The machine can design spray and water collection devices according to customer requirements. The machine uses a transmission reducer to drive the active roller to make the conveying belt rotate, so that the material can achieve the purpose of conveying. The specific form can be selected according to the user’s different working conditions. The machine is processed by foreign advanced technology, and has the advantages of compact structure, low noise, convenient use, and convenient open transportation. It is an ideal equipment for conveying and lifting all kinds of fruits and vegetables.

2, structural features and working principle

The machine is mainly composed of frame, conveyor belt, driving roller, driven roller, transmission reducer and other components.

How it works:

The fruit is fed into the feeding hopper of the machine, and the conveyor belt is driven by the active roller to transport the fruit to the next process. Manually select fruit on both sides of the machine. The machine frame is made of all stainless steel materials, and can be manufactured with a variety of profiles according to user requirements, and spray pipes and water collection tanks can also be added.

3, installation adjustment, maintenance and maintenance

1. The installation must be firm and the rack must be level.

2. Before starting the machine, check whether the screws in each part are fastened.

3. Before the machine is used, grease should be added once to each bearing and stepless transmission, and then once every six months.

4. Turn on the power, start the stepless transmission, check whether the conveyor belt is tightened, if there is looseness, adjust the tensioning screw to tighten the conveyor belt.

5. Stones, screws, and tools are strictly prohibited from falling into the equipment to prevent them from falling into the next process.

6. Test run several times, each time no more than 20 minutes, cut off the power supply, re-check according to the above requirements, and only after confirming that it is correct, can the feed test run.

7. Lubricate all parts of the machine regularly.

8. After shutting down, be sure to clean the inside and outside of the whole machine to keep it clean.