Scraper refining machine

The machine introduces foreign advanced technology, which is suitable for automatic separation of various juices and pulps to meet the needs of refining.

1. Overview
1. Scraper refining machine is currently the most advanced refining equipment in the world. It separates orange, citrus, lemon, grapefruit juice and pulp to meet the requirements of refining Claim.

2. Structural features and working principle

1. Frame  2. Sump trough  3. Skeleton  4. Slag outlet  5. Lining net  6. Filter  7. Scraper 
8. Adjusting screw  9. Drive shaft  10.Breathable cover  11.Feed box  12. Feed port 13. Drive motor 

The Scraper refining machine consists of a frame, a slag outlet, a juice tank, a skeleton, a lining screen, a filter screen, a scraper, It is composed of adjusting screw, transmission shaft, feed port, feed box, breathable cover, transmission motor and other components. Working principle: The material enters the feed box from the feed inlet and then flows into the scraper working chamber. Under the action of the centrifugal force of the scraper, the juice flows into the juice collecting tank, and the pulp is transported to the meat outlet.
3, Installation, debugging, operation, maintenance
1. The machine must be placed on a level concrete floor. If it is not flat, it needs to be padded to the level. Turn on the power of the refiner motor and confirm the machine is running. No abnormal noise. Open the breathable cover again and pay attention to whether the direction of rotation of the scraper is consistent with the direction indicator;
2. Feed the material evenly into the machine to check whether the slag at the slag outlet has reached the expected effect. If the slag is wet, please stop the machine and stop feeding, remove the protective cover on the machine frame and open the frame, and loosen the scraper. Adjust the gap between the scraper and the filter screen through the adjustment screw (note: when adjusting, turn the scraper by hand to prevent friction between the scraper and the filter screen); after adjustment, tighten the fixing nut, and Install the machine in the reverse order of disassembly. Then conduct trial production with feeding materials, and after everything is normal, continuous feeding and discharging production can be carried out.
3. When the machine is running, there is a sound of slipping of the transmission belt, immediately after stopping the machine, grab the handle and lift the pulley guard up. Lower the pulley guard, loosen the adjustment screw behind the motor pulley, let the motor seat pull the belt tightly under the action of gravity, and then tighten the adjustment screw.
4. When stopping, just cut off the power supply of the drive motor directly;
5. After the machine is shut down during each shift, be sure to open the skeleton and clean the inside and outside of the machine.
6. Grease the bearing parts regularly.